Byron hired me to replace some rotten beams on the south side of his house. The top ones were the worst; the others had a few soft spots but were pretty solid so I patched them a little bit and left them. I did have to replace the main horizontal beam and the 3 pieces above it.
I bought 6×6 douglas fir posts and cut them to size. To make the curves I cut them down to 4×6 and then glued a 4×4 post to them, then cut them out with the bandsaw. I sealed everything with Kilz 3 exterior primer. It will be painted properly later.
handyandrew.ca 